Keyless Fingerprint Lock usb Rechargeable
Mini Smart Fingerprint Lock USB Rechargeable Keyless Non-
High-Tech chip. I you need safety then we have your product. Using high-tech chips, fingerprint processing is faster, unlocking is more convenient, and your home is safer.
- Product Feature:
- Wide Application: perfectly used for doors, cabinets, bicycles, backpacks, lockers, etc.
- Simple Operation: no need tools, you can add or remove fingerprints easily by following the instructions of the manual.
- 10 Groups of Fingerprints: the padlock supports up to 10 fingerprints recording (support two administrators).
- material: zinc alloy
- working voltage: 3.0-4.2V
- Lock weight and Size:90g,7.6*4.6*1.3(cm)
- fingerprint sensor coverage: 72*64MM
- Unlock speed: within 1 second
- working period: one year per power Load
- LED light: three color light: red/blue/green
- Battery:3.7V lithium built-in battery
- Working temperature: -10 ~ + 40 degrees Celsius
- fingerprint capacity: record 10 times and save 10 groups
10 fingerprint storage
Record 10 times and save 10 groups, can be used by the whole family.
360° random angle biometricrecognition, induction rate ≤ 0.1s
- add fingerprint for the first time (Manager): Press the SET button for about 5 seconds, first the blue light is short, then the green light blinks and then releases. Will want to set Fingers are placed at the center of fingerprint touch. If the data has been successfully collected, a blue light will flash that a data can be recorded. If it is not recorded or fails, it will flash a red light to remind the collection to be invalid. After the successful acquisition, after 10 additions, the green light is on, indicating that the fingerprint has been added. The green light flashes throughout the entire process of fingerprint entry (indicates that it is the fingerprint entry status), but the lights of multiple colors are not illuminated at the same time. The finger that touches the pressure requires multiple angles to collect, which is beneficial for the expansion of the database, and is useful for the sensitivity of judgment.
- add member fingerprint: add fingerprint when there is already fingerprint: press the set up button about 5 seconds, the blue light is short-circuited once and then released, the blue light is long, then enter the administrator (two administrators) one of the fingerprints (that is, The first or second fingerprint set), when the entry administrator fingerprint is correct, the light changes from blue to green and blinks. Repeat the first step to complete the fingerprint.
- Remove all fingerprints: In each mode, press the setup button for about 10 seconds, the blue light is for 2 times and then released, the red light is, and the administrator touches the fingerprint (one of the two administrators). Next, if the fingerprint recognition is normal, the green light is illuminated and all the fingerprints are deleted.
- Lock: Immediately after on the lock beam for about 1 second into the unlocked state, it is locked immediately.
- Unlock: In the locked condition, input the fingerprint. If the fingerprint is correct, the lock beam automatically pop-up and unlock. If the fingerprint is correct, the green light is short; if the fingerprint is incorrect, the red light is short.
- low voltage: When the voltage is equal to or less than 3.5V, the red indicator flash for 15 seconds; if it is always in low power, every minute, report Police once.
- Charging: The red and green lights flash alternately during the charging process.
Tips for fingerprint recording:
- Try to adjust the sensor by different angle when lock registers your fingerprint so that it can recognize it properly while working.
- Follow the steps strictly to ensure your fingerprint that the process can be done easily.
- 1*Fingerprint Lock
- 1 * USB charging cable
- 1 * User Manual